Electrical technician palmwater pump system technician engineering assistant/apprenticeship participation in WR2 electric examination, ectrical rising mains replacement, main switchboard replacement and water pump system maintenance
YAT FULL ENGINEERING has been dedicated since its inception in 2002-2002.Repair of the main electrical system、Water pump control systemIn connection with the related work, nearly five hundred large dams have been repaired to date, of which more than seven dozen dams have been replaced together with the ectrical rising mains and the magnificent switchboard, and we welcome the presence of duty-responsible, security-sensitive engineering personnel who serve together Owners’ Corporation, property management companies and owners of the major axes.
The mass appliances are connected to the daily lives of hundreds of households -- a major switchboard failure, which can be ordered to block the whole dam; a water pump shutdown, which can allow the entire household to stop water; and working in Ya`at fully, you deal with each of the occupants.Maintenance of the building electricityandMaintenance of public power systemsThe work directly affects the safety and facilities of the community and is a meaningful professional exercise.
The company provides substantive training opportunities covering the maintenance of electrical installations, water pump smart digital systems, emergency rehabilitation processes, etc., and technicians and assistants with a view to participating in the hydroelectric industry.
Photo Source: Unsplash (free trunk)
Accumulation of live experience in a power engineering company that has focused more than two decades on the Great Depression Electricity System (WR2) and water pump control system
Participation in the maintenance of electricity and water pump systems for nearly five hundred large dams, exposure to different types of electrical installations such as residential, commercial, industrial dams and schools
electrical rising mains and damman switchboard replacement experience for more than 70 dams to study the refurbishment of the complete electrical system
Introduction of the smart digital water pump system for more than 50 per cent, with access to technology for a new generation of water pump control systems for more than 50 per cent
Leaded by senior colleagues to cover the maintenance of electrical installations, water pump smart digital systems and emergency rehabilitation processes
Installation and adaptation of WR2 power inspection, power system, to water pump, CCTV and solar engineering, with a wide range of technologies
The company is located in Kwai ChungKwai On Factory Building, where the site of the work is extended to the new frontiers, the ninelons and the Hong Kong Regions.
Full day-to-day work of Yat covers the entire life cycle of a large public power facility - installed, regularly inspected, maintained and maintained by the electricity system
We arrange periodic inspection and testing of communal electrical installations, covering main switchboards, electrical rising mains, distribution boards, final circuits and fixed equipment, and follow up on rectification work. Ordinary buildings with an approved loading exceeding 100 amperes generally require inspection at least once every five years, commonly known as “Five-year electricity examination」。
Participation in surveys, demolitions, emplacement and receptacling of the mains of Lectrical rising in the old building, studying power load calculations, sub-electric construction arrangements and post-completion tests. More information is available on:Electric rising mains replacement common problem。
Handling of cables, maintenance of appliances, replacement of spare parts and overall replacements, including loss of water from cables. Yat Full dealt with emergency repairs of 1600A and 2500Amain switchboard, as described in detail belowEmergency recovery performance。
Installation and maintenance of smart digital water pump control systems, diagnosis of edible water pumps, hedge water pumps, water pressure anomalies and water sensor failures are described in detail below.Pump System Engineering。
Establishment of public light circuits for large dams, installation of power lines for new equipment, replacement of blockers and leak protection devices, and participation in the regular maintenance of the maintenance teamElectricity system maintenanceVisits.
Yat is fully committed to reaching the site within two hours, and technicians are required to work with rotating values to deal with incidents such as dam terminals, main switchboards and water pumps, as detailed below.24-hour Emergency Repairs。
The site of the work covered the residential dam,Commercial Electricity Project、Engineering Electricity ProjectandSchool Electricity ProjectThe facts of the construction are available.Electricity Systems Engineering caseandWater pump system engineering case。
The following are established categories of posts, actual vacancies and requests are requested to be accessed by e-mail or telephone.
The works related to the inspection, testing, maintenance and major switchboard of the dam ' s electrical installations will require relevant licence plates or practical experience to accommodate emergency strikes.
Installation, maintenance and malfunction diagnosis of the water pump control system, priority is given to those who are familiar with the smart digital system and need to be able to deal independently with on-site maintenance.
Assisting on-site construction and material preparation, studying power and water pump engineering practices, is suitable for interested and hard-to-reliable applicants.
Electricity works in Hong Kong are regulated by the Electricity Ordinance (Chapter 406), whether you are new persons prepared to work or technical workers wishing to move, knowing the following statutory requirements and helping to plan their own presence.Hong Kong Electricity ProjectIndustry development.
Electrical and Mechanical Services Department defines the lithium electric works as works or work related to installation, school testing, inspection, testing, maintenance, refurbishment or repair of low-pressure or high-pressure fixed-power installations, including supervision of works and issuance of engineering certificates, all persons engaged in such work must be registered with the Electrical and Mechanical Services Department as registered electrical worker.
The flat value of large copper switchboards tends to reach hundreds to thousands of plantations, such as 1600A and 2500Amain switchboard processed by Yat FullElectricity ProjectThe level of engineering staff is higher than the work of the general housing unit.
Persons engaged in construction work are required to complete mandatory basic safety training courses (architectural works) as approved by the Labour Office and to have an effective construction safety training certificate (corically referred to as the champion of the champion). In addition, under the Regulations on the Registration of Labour Workers, any person is personally engaged in construction work at the construction site and must be registered as a registered construction worker; the specialization clause was implemented on 1 April 2002.
The Department ' s security training materials clearly indicate that the work on electrical installations should be carried out by registered electricians with the relevant knowledge and training; if a worker has an effective flat card but is not a registered electric worker, he or she is unable to carry out electric work; this is also the reason why Yaat pays full attention to the qualifications and division of labour.
Electrical and Mechanical Services Department has a continuous refresher programme for registered electrical workers, covering modules such as statutory and security provisions, and Yat Full encourages colleagues to continue their studies, closely following the Electricity (line) Ordinance and the latest requirements of the code of work.
Yat ' s accumulated empirical experience over two decades is the most valuable learning resource for new colleagues. The training focuses on:
The safety awareness is critical in the case of large utility poles and kitchens. Yat Full requires colleagues to comply strictly with safety procedures, including pre-construction breaks and separation of power sources, proper use of personal protective equipment, compliance with work permit arrangements and responsibility for electricity at the appropriate level by the eligible personnel. We believe that only safe engineering personnel can provide safe and secure services to clients.Electricity system maintenanceServices.
We welcome e-mail biographical data or cable queries and will respond as soon as possible.
Posts, contact calls, relevant licence plates or certificates (e.g., registered electrical worker levels, flat cards, construction worker registration cards) and past work experience are indicated.
E-mail to ip@yat-full.com, or electricity 3165 8142 Referrals may also be madeContact tablesRemaining information.
The appropriate applicant will be invited to interview the Kwai ChungKwai On Factory Building Office to learn about your experience and the direction of development.
Upon entry, senior colleagues are led by the gradual participation in the building electrical engineering and the water pump site work.
Personal information provided by the applicant can only be used for recruitment purposes.
Electricity work in Hong Kong for a fixed power facility must be for registered electrical worker registered with Electrical and Mechanical Services Department, with a corresponding level of electrical demand for work (grades A, B, C, H or R). Those with relevant licence plates or substantive experience have welcomed requisitions, and the actual requirements are based on individual positions.
A is a low-pressure fixed-powered power plant with a maximum electricity demand of no more than 400 tranquillities (one or three); B is a low-pressure fixed-power facility with no excess of 2,500 tree; C is a high-pressure power facility; R is a designated type of device, such as a brick, air conditioning, power-generating facility.
The engineering assistant/apprenticeship position is suitable for an applicant who is interested in entering and working hard and reliable, primarily to assist in on-site construction and material preparation and to learn from the building electrical and water pump engineering practice.
Persons engaged in construction work are required to complete mandatory basic safety training courses (architectural works) and to have an effective construction safety training certificate (known as Pyongca), and construction work in construction sites is registered as a registered construction worker under the Regulations on the Registration of Industrial Workers.
It is not the basic security training certificate that a worker is unable to carry out electric work if he has a valid flat but not a registered electric worker; the work of the electrical installation shall be performed by a registered electric worker with the relevant knowledge and training.
Biographical information should be sent to e-mail ip@yat-full.com, or electricity 3165 8142 Referrals may also be madeContact tablesRemaining information. Curricula vitae may indicate recruitment, related licence plates and work experience.
Pre-Accession to know our electricity and water pump for Hong Kong building
WR2 Electricity Inspection, electrical rising mains replacement, building main switchboard replacement and refurbishment of the electrical system.
For further information
Intelligent digital water pump control system installation, water pump system maintenance and maintenance.
For further information
The power park, main switchboard fault, pump breakdown, within two hours.
For further information
Owners’ Corporation and property management electricity and water pump maintenance contract, engineering tender support.
For further informationE-mail biographical data to ip@yat-full.com or electricity 3165 8142, joined YAT FULL ENGINEERING team.
