34 Field construction photographs - nearly five hundred building and electrical system maintenance experience, and more than seven do electrical rising mains and main switchboards were completed and replaced
YAT FULL ENGINEERING was established at the beginning of 2002, initially focusing on new construction of electricity systems, school construction and government hospitals, followed by maintenance of the building of the electricity system (WR2) and water pump control system at the 200-14-05 shift camp, and has been repaired to more than five hundred buildings, including more than seventy-nine buildings, together with rising electrical mains and building and main switchboards.
Yat Full Building in Hong Kong RegionsBuilding Electrical MaintenanceThe work is well under way, as the electro-room space for each building, the main switchboard capacity, the electrical rising mains pathway and the length of the building are different, the photographs allow Owners’ Corporation, the property management company and the owner to have a full picture of the construction quality and serial arrangements of Yat.building electrical maintenance service page。
Yat Full-Centre building Electricity System (WR2) repairs, including electrical rising mains and building main switchboard replacements, have so far served almost five hundred buildings, and spot photographs can be exaggerated.
Yat Full Electricity Engineering case covers various parts of building public power installations - main switchboard for electrical wards, electrical rising mains to plating cables
The main switchboard (electrical cables, main cables) in the cable house is the general switch and protection device after the electricity company has taken power. Replacement works include the removal of old tumours, the installation of new furnaces, the refrigeration, marking and testing of the circuit and Yat Full has dealt with the replacement and repair of 1,600A and 2,500A main switchboard.Switchboard Replacement。
The main dry cable, which is run by the main switchboard vertically across the various floors, involves the installation of new circuits, receptacle of sub-stations, cable collation and phase-out arrangements. The buildings above the four layers should normally be equipped with three different electrical rising mains and set up three linear sub-sections at each level.Rising Mains Replacement。
Sub-room cables and appliance boxes in the various floor platings are often refurbished, including the replacement of blockers, the repair of barriers, the retrospection of circuit signs, the collation of receptacles and the dismantling of waste devices, which are often unqualified projects for five years.
Two main switchboard explosions handled by Yat Full were caused by leakage of cable water, ventilation, lighting, equipment marking and impurity clean-up.building electrical maintenanceFocus.
Electricity devices are regularly checked to cover main switchboards, electrical rising mains, appliances, final electrical circuits and fixed electrical equipment, including eye inspection and power testing, and follow-up on defects.WR2 Inspections。
Improvements in public corridors and gradient light circuits, lift machines and water pump supply lines, back-to-ground systems and maintenance of protection mentors, as appropriateMaintenance of the building electricityDaily scope.
In the last five years, German building caused an explosion of 1600A cables as a result of the leakage of electrical dams. Yat Full knew that the crash was carried out immediately and applied to the electricity company for a temporary electricity supply of 1200A III. The building was restored to basic electricity as soon as possible, followed by the replacement of a new 1600A ter.
Soon-hong-hong-hong-hong-hong-hong-hong building also caused an explosion of 2,500A cable due to the leakage of electrical cables over a period of two and seven years. Yat Full immediately carried out the renovation and replaced the spare parts damaged by 2,500A main switchboard and reinstated the two buildings with electricity.
In addition to emergency repair, Yat Full has completed the replacement of more than seventy buildings with electrical rising mains and building main switchboardsRenovation of the electricity systemEngineering. Such works are to recalculate the power load of the building, to design the capacity of the new old equipment, to phase out the power and to check, test and issue WR1 ' s certificate of completion after completion.
Increased number of cases of looting and corporate backgroundsCorporate profile: emergency repair performanceand24-hour Emergency Repairs。
Owners’ Corporation and property management are referred to in the comparing contractor’s engineering photography, using common unconforming items listed in the five-year round-up workshop, as shown below.
Frequently unqualified projects of the appliance appliances are broken, and completed appliances should have complete barriers to prevent direct exposure to the band electrical component.
Frequently unqualified projects: individual switches do not indicate the circuits to which they belong, and each switch should clearly indicate the route to which they belong, facilitate future repair and emergency isolation.
Frequently unqualified projects: appliances of the cables are inadequate, cable cables, circuit boxes, etc., are not fitted, and the tunnels and proper receptacle are basic requirements.
Frequently unqualified projects: bandwidth outdoor opens, and any appliances should be protected by appropriate barriers or casings.
Frequently unqualified projects: the lithium device does not provide access to the protection of the mentors, the electroconcentrations, etc., and the new device should have a complete protection guide and equivalent receptacle.
Frequently unqualified projects: the planting of impurities in the kitchen, the discarding devices were not demolished and the devices were heavily corroborated; the electrical kitchen should be completed and the old equipment should be dismantled.
For a complete list seeFixed five-year check-ups are often not in line with standard projects。
The complete serial of surveying, computing, quotation, power-concession coordination, construction and testing after each completed photo back
Record the state of existing equipment, circuit pathways and space restrictions in cables, electrodes and public places.
Recalculation of power system loads for building, identification of main switchboards and electrical rising mains capacity, reserved for future growth space.
The specifications of the material, the scope of the construction and the power-free arrangements are set out in conjunction with the Owners’ Corporation ' s request for proposals and the master ' s conference procedures.
In coordination with electricity companies and households, pre-screened notices and, where necessary, temporary electricity.
Removal of old equipment, installation of new equipment, emplacement of circuits and receptacles, with a view to minimizing the duration of each suspension.
Upon completion, a registered electrical worker was checked, tested, and a certificate of completion was issued before the circuit (WR1).
Yat Fully, most cases of maintenance and renovation of the electricity system come from residential building, including the old buildings and roofs, in conjunction with the Owners’ Corporation budget and the Master ' s Assembly schedule.
Commercial building and main switchboards of business premises, rising electrical mains and maintenance of the public power system generally provide for non-office time or zoning power parcels.
Industrial building has a high load and main switchboard capacity, and Yat fully is based in Kwai Chung industrial area and is familiar with the maintenance and renovation needs of artisans ' electrical installations.
Yat Full has been engaged in the construction of additional schools and the Government Hospital ' s Electricity Project at the beginning of its establishment, with the experience of the school Electricity Project in connection with the work of the leave.
The photography records YAT FULL ENGINEERING ' s construction of the electricity system in Hong Kong, covering the replacement of the main switchboard (electronic) building, the replacement of electrical rising mains, the reconfiguration of the sub-electric appliances and distribution appliances, the upgrading of electrical kitchen equipment and the regular inspection and testing of WR2 electrical installations.
Yat Full has been dedicated to building the electricity system (WR2) for five years from 2002 to 2002 and has been repaired to more than five hundred buildings, of which more than seventy have been replaced with electrical rising mains and building main switchboards.
Reference may be made to the common non-conformity items listed by Electrical and Mechanical Services Department: completeness of the lithium barrier in the appliance appliance appliances, adequacy of the electrical circuit, wiring and circuit circuits, corrosion of the devices, external exposure of the appliances, removal of the appliances, as well as the integrity of the appliances on this page.Assessing Workmanship。
The main switchboard and electrical rising mains Replacement of repairs or alterations to fixed-power installations shall be checked and tested by registered electrical workers prior to fluctuation and the issuance of a certificate of completion (WR1). WR1 does not need to be submitted to the Electrical and Mechanical Services Department, but should be kept for details.WR1 and statutory questions and answers。
Cable. 3165 8142 or e-mail ip@yat-full.com, Yat Full will arrange a site inspection, recalculate the building’s electrical loading and provide an itemised quotation. We focus on electrical and pump projects valued at up to HK$2 million.
WR2 Electricity Inspection, electrical rising mains replacement, building main switchboard replacement and details of electrical system renovation services.
Knowledge services
Intelligent digital water pump control system installation and maintenance of live photographs.
hyperlinks
Electricity parked, main switchboard fault, electric cable explosions, within two hours.
For further information
Electricity, water pump, CCTV and solar energy in the four main areas of work.
Demonstration of return productWR2 Electricity Inspection, electrical rising mains Replacement, building main switchboard replacement - electricity 3165 8142 or complete search forms, Yat Full arranges for on-site surveys and provides sub-statements for you.
