Provision of one-stop power system installation, maintenance, maintenance, alteration, renovation and water pump for Hong Kong building, Owners’ Corporation and Property Management Corporation
Established in 2002 and based in Kwai Chung, New Territories, YAT FULL ENGINEERING specialises in building electrical systems and WR2 inspections, pump control systems, CCTV and solar engineering. We provide reliable and carefully planned solutions for Owners’ Corporations, property managers and building contractors, with competitive costs and quality materials. We have maintained systems in around 500 buildings, including over 70 where both rising mains and main switchboards were replaced.
WR2 Electricity installations are regularly checked, tested, flawed, main switchboard and electrical rising mains replacement to ensure that building is safe for electricity supply.
Knowledge of building electrical repairs
Intelligent digital water pump control system design, installation, water pump system maintenance and maintenance, faults, immediate diagnosis, reduction of household water pumping.
Learn about pump system maintenance →
A 24-hour maintenance operation was set up and a commitment was made to reach the site within two hours to deal with an electrical cession accident.
Awareness of emergency rehabilitation
Provision of electricity and water pump for Owners’ Corporation and property management, regular maintenance contracts, small engineering tenders and post-accident follow-up.
Knowledge of property management utilities
Public power installations include general switch cables and circuit cables, electrical lines (e.g. electrical rising mains) for all residential units and merchants, and public electrical installations such as elevators, water pumps, cantons, stairs and corridor lighting, the owners of which include Owners’ Corporation and property management companies, once faults occur, affecting more than one household and building.
Yat Full from 2002 to 2002Repair of the main electrical systemIn 2002, a repair and maintenance team was set up to maintain the building of the electricity system and the water pump system.
The regular maintenance of fixed-power installations would help to ensure the reliability of the electricity supply, prevent electrical accidents and protect the property industry; for example, if the electrical installations were not properly maintained, subsequent maintenance costs may be higher than regular maintenance, and owners may be subject to third-party claims.Electricity system maintenanceThe organization regularly screens cable houses and public power installations and detects early exposures such as barr fever, piece ageing and infiltration.
WR2 is a tabular number under the Electricity (Travel) Ordinance. The owner of a fixed power facility, including individual unit owners, property management companies and Owners’ Corporation, has a responsibility to arrange regular inspections and tests.
Fixed electrical installations in ordinary buildings with an approved loading exceeding 100 amperes, or in factories and industrial undertakings exceeding 200 amperes, must be inspected, tested and certified at least every five years. Premises such as hotels, hospitals, schools and childcare centres require inspection every five years regardless of loading.
Public entertainment sites, places where dangerous goods are manufactured or stored, and fixed-pressure power installations are subject to an annual check and test.
All fixed cables and associated electrical equipment, including main cables (main switchboard), electrical rising mains routes, electrical appliances, final electrical circuits and fixed electrical equipment, shall be subject to regular inspection and testing.
The registered electrical contractor must issue WR2 within one month of completing testing. The owner must submit it to the Electrical and Mechanical Services Department for endorsement within two weeks of issue. The endorsement fee is HK$695 per application; the contractor may be asked to submit it on the owner’s behalf.
The advantage of Yat Full is to screen and reorganize a lobster: the electrical rising mains and main switchboard issues found at the WR2 inspection can be transferred directly from Yat FullRising Mains ReplacementandSwitchboard ReplacementEngineering, Owners’ Corporation don ' t need another contractor .WR2 Frequent problems of electricity inspection。
Electrical rising mains is the building main switchboard, which runs vertically across all floors and provides electricity to each branch of the cable and household unit. The electrical rising mains in many of the old Hong Kong buildings have been used for several decades, with insulation, receptacle oxidation, combined with household refrigeration and electrical appliances that are much more than designed in the current year.
The Code of Practice of Electrical and Mechanical Services Department ' s Electricity (Travel) Regulations stipulates that any building above four layers of high (including underground) shall be equipped with three different electrical rising mains and each layer with a three-phase four-line branch. Yat is fully in the design, with the consent of the supplier.Electric rising mains replacementThe programme will recalculate the power load of the building and reserve future power growth space.
Site survey → load calculations and design → itemised quotation → procurement by the Owners’ Corporation → coordination of power shutdowns with the power company and residents → phased construction → inspection, testing and issue of WR1 → restoration of power. Yat Full has replaced both the electrical rising mains and main switchboards in more than 70 buildings. For project photographs, seeElectricity Systems Engineering case。
The building main switchboard (also known as cables, main cables) is located in the cable house, which is the general switch and protection unit after the power company is to distribute electricity to electrical rising mains, elevators, water pumps and public lighting. The main switchboard will be built together, once the fault is passed, and the building will be suspended at the same time.
In the second half and five years, the cantonment of Khord building in the Gulf caused an explosion of 1600A cables as a result of the leakage of electric cables, Yat Full immediately looted, applied to the electricity company for 1200A terres and replaced 1600A terres; in the second seven years, the fluangle-hon and healing building resulted in a further 2500 A cable blast and replacement of the Yat.Emergency recovery performance。
Replacement of large rollersIt would be preferable to plan together with the replacement of the rising mains, the upgrading of the electrical cables at all levels, the completion of an upgrade of the power system in the old building, and the reduction of multiple power cuts and duplicative expenses.
Yat Full began with the creation of a new building of electricity systems, school construction and government hospitals, with experience in installing electricity systems from a zero start.
Additional public-use power installations, such as the installation of power lines for new equipment or new water pumps, the installation of public light circuits, the installation of electrical appliances and protection devices to ensure compliance with the Electricity (line) Regulations and actual load requirements.
Local changes to existing electrical installations, such as replacement of part of cables, conversion of branch cables, reallocation of electrical circuits or upgrading of individual circuit capacity, as well as changes in the use or equipment of building.
The overall upgrading of the old electrical installations -- main switchboard, electrical rising mains and the replacement of plating cable boxes at all levels has allowed the power system of the old building to be re-compliant with current demand for electricity and safety standards.
Upon completion of the new installation, assembly, modification or maintenance, the registered electrical worker must be checked and tested before appliance and issue a certificate of completion (WR1). WR1 does not need to be delivered to Electrical and Mechanical Services Department, but is due to be kept for details.WR1 and statutory questions and answers。
When a building’s fresh-water or flushing-water pump stops, residents can immediately lose their water supply. Since 2003, Yat Full has used intelligent digital systems that identify faults immediately and enable prompt repairs. Over 500 systems have been installed, with no unit failures recorded to date.
Water pump Electricity from building public power installations, Yat Full, with electricity and water pump specialization, will be availableWater pump system maintenanceIn conjunction with the main switchboard, electrical rising mains works, it is planned to reduce duplication of power park and contractor coordination.
Yat Full has established 24-hour maintenance services at the time of opening and is committed to reaching the site within two hours - Emergency hotline 3165 8142
building Partial or complete power park, main switchboard, no longer repositioned, electrical kitchens with burns or symptoms
Electricity devices are smoked or damaged, electrical plating water, and are required to apply to the electricity company for temporary electricity
Water pump park, water pressure anomalies or water disruptions, intelligent digital systems for rapid diagnosis
If there is a risk of cigarettes, fire alarms or personal hazards, please call for electricity 999.
Since then, Yat Full has followed a number of construction contractors to check, test and maintain electrical installations for each building; the direct bid for customer service was initiated in early 2002, and we understand that property management focuses on safety compliance, budget control and traceable maintenance records.
In accordance with regulation 20A of the Building Property Management Regulations, Owners’ Corporation has a procurement value of more than 200,000 yuan or 20 per cent of the annual budget of Owners’ Corporation, whichever is smaller, subject to tendering; Yat Full has been directly tendered since 2002 and seven years to provide clear sub-statements in conjunction with the Owners’ Corporation bidding process.quotations and invitations to bid。
Extension to building security and renewable energy projects based on the electricity engineering profession
CCTV monitoring systems are planned and installed for the building of public corridors, entrances, garage and facilities, design recommendations, installation of mirrors and video equipment, routing, operating training and regular check-ups, and can be upgraded to a digital high-profile programme, in conjunction with electrical works to reduce duplication.
CCTV system
Provision of solar energy design, installation and maintenance of power-generating devices to assist the industry in the regeneration of energy and to ensure the safe and stable operation of solar energy systems and building of electrical installations, in conjunction with the electricity engineering profession.
Knowledge of solar energy systemsDifferent types of statutory inspection cycles, load characteristics and construction restrictions vary, and Yat fully develops electricity engineering programmes based on physical conditions of business
Residential buildings with an approved loading exceeding 100 amperes require a WR2 inspection at least once every five years. Yat Full provides building electrical repairs and replacement of rising mains and main switchboards for individual older buildings and housing estates, coordinated with the Owners’ Corporation’s budget and meeting schedule.
Commercial building, business premises and office buildings are equally subject to periodic inspections every five years, and commercial power works are focused on reducing the impact on tenant operations and generally require non-office time or sub-sector power cuts.
Factories and industrial sites permit over 200 tranquillities to be inspected at least every five years. Industrial building is expensive and Yat fully is based on Kwai Chung industrial area, familiar with main switchboards, electrical rising mains and maintenance of public power systems.
Schools and young children ' s centres must be inspected every five years, regardless of their load, and Yat Full was engaged in the construction of an additional electricity project at the initial stage of the establishment, familiarizing itself with the time requirements for work on leave and completion before the school.
Inquiries and answers from various types of businessCommon problems in commercial, craft and school electrical engineering。
Our clients include Owners’ Corporations, property management companies, estate offices, commercial and industrial building owners, and customers and building contractors seeking electrical or pump projects valued at up to HK$2 million. As a small engineering company, we minimise unnecessary costs to deliver quality work at competitive prices.
Example of engineering case, if availableProjectsCorporate backgroundAboutProject price or emergency support requestContact。
Upon completion of the work or maintenance schedule, a clear proposal is provided for on-site information and budget.
Electricity 3165 8142 or e-mail ip@yat-full.comDelivery of the building address, type of property industry, last WR2 certificate, ISP reminder (if any) and description of the problem.
On-site visits to cable houses, kitchens and public places, recording the status of main switchboards, electrical rising mains, branch cable boxes and water pump control systems and recalculating power loads.
Deficiencies, material specifications, construction and power-free arrangements are identified to facilitate the comparison of Owners’ Corporation in the main assembly or tender process.
The schedule of work, the post-completion inspection test, the issuance of WR1 or the alignment of WR2 procedures by the nature of the work, and the transfer of regular maintenance arrangements.
Electricity and water pump system for nearly five hundred buildings repaired
Over seventy building completed and replaced electrical rising mains and main switchboard
24-hour maintenance, commitment to reach the site within two hours
Yat Full provides building electrical maintenance, periodic check-ups and defects of the WR2 electrical installations, replacement of electrical rising mains, building main switchboard replacements, installation, modification and renovation of the electrical system, water pump control system and water pump system maintenance, 24 hours emergency repairs, management of utilities and CCTV and solar energy systems works.
Yat Full will identify the defects and priorities at WR2 inspection, provide a full quotation price and carry directly the electrical rising mains, main switchboard and fitting appliances, etc., for replication and testing, and Owners’ Corporation does not need to have another contractor.
Yat Full services residential building and huts, commercial building, industrial building, schools and institutions, including Owners’ Corporation, property management companies, roof offices, business building owners and construction contractors.
Yat Full is a small engineering company focusing on electrical and pump projects valued at up to HK$2 million. By reducing unnecessary costs, we offer quality engineering at competitive prices.
Water pump is supplied from building public power installations, Yat Full is also professional in electricity and water pump, and can plan water pump system maintenance in conjunction with main switchboards, electrical rising mains, etc., to reduce duplication of power cuts and coordination among multiple contractors.
Yat Full, based on the New Territories Kwai Chung, provides electricity and water pump for the long-term construction of the Hong Kong Regions, with rapid support for emergency maintenance and maintenance projects in the New Territories and in the Nineon Region.Contact。
WR2 Electricity Inspection, electrical rising mains replacement, building main switchboard replacement, water pump system maintenance - electricity 3165 8142 or completed search forms, and YAT FULL ENGINEERING Teams are ready to serve you.
